THE QUICK ANSWER

Compare exact overall length and width together, then check handle length, grip circumference and thickness separately. A shape label or a compliant size does not establish performance or equipment approval.

Same-scale dimension boxes show JOOLA Scorpeus Pro IV 16mm at 16 by 8 inches and Perseus Pro IV 16mm at 16.5 by 7.5 inches, with handle ends aligned. Each listed length-plus-width total is 24 inches. Silhouettes are simplified, not exact product traces.
Original Netside dimension comparison. Boxes share one drawing scale; silhouettes are illustrative. JOOLA specifications checked November 2, 2026. No approval or performance result is implied.

A paddle described as “elongated” may look quite different from one called “standard,” but those labels are only a starting point. Before choosing, compare the exact overall length, width and handle measurements for the model and version you are considering.

The illustration above puts two manufacturer-listed examples on the same drawing scale. It shows a difference in proportions, not a ranking of their performance. Neither outline is a photograph or an exact tracing of the product.

Read overall length and width together

Overall length runs from the top of the paddle to the end of the handle. Width is the outside measurement across the widest part. Handle length is a separate specification within the overall length; do not add it to the listed overall length a second time.

Here are two examples from JOOLA's official US product pages, checked November 2, 2026:

Exact example Overall length Width Listed grip length
Scorpeus Pro IV 16mm 16 in 8 in 5.25 in
Perseus Pro IV 16mm 16.5 in 7.5 in 5.5 in

JOOLA labels these shapes standard and elongated, respectively. In this pair, the second paddle adds half an inch of overall length and gives up half an inch of width. Both listed length-plus-width totals equal 24 inches. Those are specific product examples, not dimensions that every paddle in either category must use.

The same-scale diagram compares the outside dimension boxes. Its simplified handle and shoulder curves do not reproduce the manufacturers' actual face shapes, and you should not use it to estimate hitting-surface area.

Know the size limits, then check approval separately

As checked November 2, 2026, the 2026 USA Pickleball Official Rulebook, rule 3.D.2, sets two limits: the sum of overall length and width may be at most 24 inches, and overall length may be at most 17 inches. The dimensions include the edge guard and butt cap. USA Pickleball links its current rulebook from its official rules page.

A quick arithmetic check can catch a misunderstanding. For example, combining 17 inches of length with 8 inches of width gives 25 inches, which exceeds the combined limit even though the length alone is within its limit. This is a hypothetical calculation, not a real product specification.

Passing a size check does not establish equipment approval. For an event requiring USA Pickleball-approved equipment, check the exact model in the official approved paddle list and confirm the organizer's requirements. This guide does not certify any paddle or establish the current approval status of the two examples.

Separate handle length, grip size and thickness

Generic paddle with separate brackets for overall length, outside width and handle length. Thickness and grip circumference are different specifications. The illustration is not to scale.
Original Netside measurement illustration. Generic geometry, not to scale or a finished-product specification.

Handle length describes space along the handle. Grip circumference describes the distance around the wrapped handle. Paddle thickness is a side-profile measurement. None of those numbers can substitute for the others.

If you use both hands on some shots, check the actual usable grip area with both hands in place. The transition into the paddle face and the butt shape can affect how the listed handle space feels to you. A longer overall paddle does not automatically give you the handle arrangement you want; inspect that specification separately.

For the wrap itself, use our grip-size and overgrip guide. Compare the finished setup rather than assuming a borrowed paddle's extra wrap is part of the stock specification.

Use shape labels to shortlist, not to predict every shot

Terms such as standard, widebody, hybrid and elongated help organize a catalog. When a label appeals to you, turn it into a few concrete questions: What are this version's measurements? How much handle space does it offer? How does the finished paddle feel when I bring it into position?

Width and length describe geometry. By themselves they do not establish a measured sweet spot, spin rate or how comfortably you will handle a paddle. For the mass-distribution part of that decision, read why equal-weight paddles can swing differently.

When a demo is available, compare a small set of familiar shots and note what you notice about contact and positioning. Keep the ball and grip setup consistent where possible. Treat those notes as your experience, not a laboratory result or a universal recommendation for everyone using the same shape.

Keep a short dimension comparison record

Use the same fields for every candidate. This is more reliable than comparing a product photograph from one seller with a shape nickname from another.

Save this detail Check it this way
Exact model, generation and version Match the specification page to the paddle you would buy
Overall length and width Record the units and check the combined total
Grip length and circumference Keep along-the-handle and around-the-handle measurements separate
Thickness Record it separately from face dimensions
Fit observations Note the usable handle space and your own demo impressions
Event requirements Verify the exact listing and applicable rules when needed

If a listing says only “standard size,” ask for the missing measurements. If specifications disagree between pages, ask the manufacturer to clarify before treating either set as final.

Netside's current paddle images are design previews. Final geometry and specifications will follow after factory adaptation and finished-sample checks. The examples and diagrams in this guide are not dimensions or approval claims for the upcoming Netside lineup. For the broader buying decision, use our first-paddle checklist.

Sources & editorial note

Sources checked 2026-11-02. This guide was prepared with AI assistance and checked against the sources above. Read our editorial standards.

MEET THE BRAND

A new side of pickleball.

Netside's first US lineup is in development. Explore the paddle designs while final specifications are being confirmed.

Explore Netside paddles