THE QUICK ANSWER
Scale weight gives the total. Balance point locates the center of mass. Swing weight describes rotational inertia about a stated axis. Compare the same grip/accessory setup and keep measurement references with the numbers.
Two paddles can show the same weight on a scale and still feel different when you bring them into position. The scale tells you the total; it does not tell you where that mass sits or how much the paddle resists being rotated.
To make a useful comparison, separate three questions: How much does it weigh? Where does it balance? What is its swing weight? Then compare the finished setup you will actually hold. This guide explains those questions without assigning an ideal number to every player.
Static weight: start with the complete paddle
Static weight is the reading when you put the paddle on a scale, commonly listed in ounces or grams. Selkirk's paddle-weight explainer distinguishes that scale reading from resistance during a swing.
When comparing a listing with a demo, ask what the weight includes. An overgrip or added accessory changes the setup. Record those details instead of comparing a modified demo with a published stock specification as though they were identical.
A model's stated range is also different from a measurement of the individual paddle you receive. If a particular weight matters to your purchase, ask the seller whether it can confirm the individual paddle's weight and the setup used for that reading.
Balance point: locate the center of mass
Balance point describes where the paddle's center of mass lies along its length. Paddletek's weight and balance explanation describes measuring it from the butt end of the handle.
The reference matters. A distance measured from the handle end cannot be compared directly with a distance measured from the face tip. Keep the units, reference point and grip setup with the number.
A balance point farther toward the head tells you something about mass distribution along the paddle. It does not describe every detail of that distribution. Two objects can have the same total mass and balance point while arranging mass differently around that point. Balance point alone is not a swing-weight measurement.
Swing weight: distance from the axis matters
Swing weight describes rotational inertia about a specified axis near the handle. It concerns resistance to changing rotational motion, rather than the total on a scale. Paddletek uses the pitch-axis description to distinguish it from twist weight, which concerns rotation about the paddle's lengthwise axis. Keep those measurements separate.
The basic physics is explained in OpenStax's discussion of moment of inertia: each piece of mass contributes according to its mass multiplied by the square of its distance from the chosen axis. Moving a piece farther from that axis increases its contribution.
In the diagram above, both examples have three identical pieces of mass and the same pivot axis. The outline is treated as massless. Moving each dot outward in B keeps the total mass unchanged but increases rotational inertia. The triangles mark the balance points of those dots. This is a teaching model, not a map of a real paddle's internal construction.
A real paddle has distributed mass, and its feel also involves the grip, geometry and your motion. The illustration does not predict a particular player's swing speed, shot power or comfort.
Read the three measurements together
| What you have | What it tells you | What it does not establish |
|---|---|---|
| Static weight | Total mass of the measured setup | Its distribution or swing weight |
| Balance-point distance | Location of the center of mass along the paddle | Complete mass distribution or rotational inertia |
| Swing weight with a stated method | Rotational inertia about that method's axis | A guaranteed playing outcome for you |
If swing-weight figures come from different sources, check the units, pivot reference, measurement method and whether the paddles were stock or modified. A number without that context is a prompt to ask questions, not a reliable shortcut for ranking paddles.
Do not interpret a more handle-biased balance as proof of lower swing weight after an accessory change. Adding mass alone cannot reduce rotational inertia about an unchanged axis: its contribution is non-negative. Changing where you hold the paddle changes the axis relative to your hand, which is a different comparison. This is why a balance-point check cannot replace a swing-weight test.
Use a short comparison record at a demo
Start by noting the actual grip and accessories. Our overgrip and replacement-grip guide explains why the handle you hold may differ from the stock version.
Use the same comfortable grip position and a small set of familiar shots with each candidate, where a demo is available. Note whether bringing the paddle into position and changing direction feels manageable for you. Those are personal observations; they are not instrument measurements or evidence of injury prevention.
| Save this detail | Why it helps |
|---|---|
| Exact model and version | Avoids mixing specifications from similarly named paddles |
| Grip and accessories | Identifies the finished setup you compared |
| Individual weight or listed range | Distinguishes a measurement from a model specification |
| Balance point, units and reference | Makes the distance interpretable |
| Swing-weight source and method | Makes the rotational measurement interpretable |
| Handling observations | Keeps your experience separate from the numbers |
You do not need every metric to begin trying paddles. Use the information available honestly, mark missing details as unknown, and avoid filling gaps with assumptions based on price or material labels. For the wider purchase decision, use our first-paddle checklist.
Netside's final paddle weights, balance points and any measured swing-weight specifications are still being confirmed. The illustrations here teach a comparison method; they do not describe tested Netside products.
Sources & editorial note
- Selkirk: static weight versus swing weight
- Paddletek: paddle weight, swing weight and balance definitions
- OpenStax University Physics: calculating moments of inertia
Sources checked 2026-10-26. This guide was prepared with AI assistance and checked against the sources above. Read our editorial standards.
MEET THE BRAND
A new side of pickleball.
Netside's first US lineup is in development. Explore the paddle designs while final specifications are being confirmed.
Explore Netside paddles

